FILTER BY PROJECT:
PLEASE SELECT
New Cross Gate Depot, New Cross, London Wood Lane Tube Station, London Brookhurst Wood, Horsham, West Sussex Formby Grid Substation, Formby, Lancashire Bernard Weatherill House, Project CCURV, Croydon Drapers Gardens, London One Hyde Park, Knightsbridge, London Tesco, Woolwich Central 20 Fenchurch Street, London Westfield London 40 Holborn Viaduct, London One Churchill Place, Canary Wharf Cannon Place, London Dartford Thurrock Crossing West Bore, Kent
FILTER BY PRODUCT:
DRYLINING, SFS AND READY MIXED PLASTERS
PROMAT DURASTEEL
FIRE STOPPING AND PENETRATION SEALING
 
INSULATION
RAINSCREEN CLADDING
STRUCTURAL STEEL PROTECTION
 
TUNNELS
Tesco, Woolwich Central

Tesco, Woolwich Central

Insulation - Case Study

CASE STUDIES > TESCO, WOOLWICH CENTRAL

Tesco, Woolwich Central

Client: Tesco PLC
Architect: Sheppard Robson
Construction Manager: Willmott Dixon

SCOPE OF WORKS:
Thermal Insulation: 15,000m2 Celotex FR5000 

The New Woolwich Central development, which is located 10 miles east of central London, includes 400 apartments and a Tesco Extra hypermarket.  Beneath the store is a car park, which is split across two floors, boasting 600 parking spaces.  

The Woolwich Central development required high performance insulation to be installed between the floor of the new 85,000 sq ft Tesco store and the underground car park.  Installed on the concrete soffits and ceilings between the two areas, the purpose of the insulation was to enhance the shopping experience by preventing noise and cold air from passing from the car park area into the supermarket.  The design was to achieve a BREEAM rating of ‘Very Good’.  The scope of the project and the many different trades involved meant that there was an added requirement that the chosen insulation be quick and easy to install.  

Having worked with main contractor Willmott Dixon on a previous mixed use Tesco development In London, Sharpfibre was contracted to advise on and install the insulation layer.  After close consultation with Celotex Technical Centre, Sharpfibre specified 15,000m2 of Celotex FR5000 in a thickness of just 80mm.  In doing so we were able to ensure that the target U-value of 0.25W/mK was achieved, whilst reducing costs and minimising waste.  

Thanks to textured aluminium foil facings, which offer low emissivity, Celotex FR5000 has a low thermal conductivity value; ensuring a low heat transfer which serves to prevent condensation, whilst offering maximum thermal performance.  The aluminium foil facings, which can be cut to fit even the most intricate areas, also meant that there was no requirement for additional facings, thus keeping installation time down.  

Sharpfibre’s experience of working with Celotex products and our early consultation with their Technical Centre ensured that the project was completed on time.  The installation achieved the required U-value of 0.25W/mK, with the processes used contributing to the BREEAM rating of ‘Very Good’.  

Works began in August 2012 and were completed in February 2013.

Related Products and Services disciplines:

Insulation

PRODUCT INFORMATON

INSULATION

With building designers and owners facing increased energy costs and more stringent regulations, solutions are now available to meet the highest demands of current building legislation.  These solutions not only include the thermal performance but also associated requirements which may include acoustic and fire protection.

Thermal Insulation
The installation of phenolic, mineral wool or glass fibre insulation boards satisfies the thermal insulation performances currently set out in Part L of the Buildings Regulations.  Phenolic materials offer the thinnest solution, whereas mineral wool or glass fibre materials offer a lower cost option.

Various finishes are available, including plain facing, or an aluminium foil face, where the finish is more demanding.  A calcium silicate facing board is available with these materials and is particularly suited where the insulation could be exposed to impact.

Fire Protection
Mineral wool and glass fibre insulations have been tested for the fire resistance to BS EN 1363-1: 1999 and provides up to 240 minutes fire protection to a concrete soffit.

Both of these products are non-combustible and achieve a reaction to fire classification of A1.  By applying the calcium silicate facing board to the phenolic insulation, similar properties can also be achieved.